Penerapan Klasifikasi Massa Batuan dan Metode Kesetimbangan Batas Terhadap Kestabilan Lereng Tambang PT. Ifisdeco, Sulawesi Tenggara

Jenly Oksteming; Wd Rizky Awaliah; Erwin Anshari

doi:10.56099/ophi.v6i1.p36-41

Authors

Jenly Oksteming Program Studi Teknik Pertambangan Universitas Halu Oleo, Indonesia
Wd Rizky Awaliah Universitas Halu Oleo
Erwin Anshari Program Studi Teknik Pertambangan Universitas Halu Oleo, Indonesia

DOI:

https://doi.org/10.56099/ophi.v6i1.p36-41

Keywords:

faktor keamanan, optimalisasi lereng, longsoran baji, nikel laterit, ifisdeco

Abstract

PT Ifishdeco often experiences problems in its mining activities, which originate from geotechnical issues, such as landslide events. This study aims to recommend the value of slope parameters to remain stable and safe by considering the influence of geological structures and types of landslides in the South Block Jey Pit of PT Ifishdeco Tbk. Slope stability analysis using the Bishop method with Mohr-Coloumb criteria based on direct shear strength test results and rock mass classification. The results of the study show that the safety factor value of the actual slope geometry on slope A and slope B obtained safety factor values of 0.79 and 0.83 with unstable conditions caused by the influence of the presence of discontinuity planes that reduce the strength of the slope constituent. Based on the kinematic analysis results, the landslide types found on slopes A and B are classified as wedge failures. Optimization of slope geometry is required as a recommendation for slope geometry design. Optimization of the slope height and bench slope is necessary.

References

Amrullah, M. F., Zakaria, Z., Sophian, R. I. & Tunggal, J. 2019. Optimisasi Kestabilan Lereng Tunggal Lapisan Overburden Rencana Tambang Mahayung Dengan Pendekatan Probabilistik. Geoscience Journal, 3(6), pp. 480-488.

Arief, M. Z. 2020. Studi Pengaruh Geometri Lereng pada Analisis Kemantapan Lereng 2D dan 3D Dengan Metode Kesetimbangan Batas. Indonesian Mining Professionals Journal, 2(1), pp. 51-56. https://doi.org/10.36986/impj.v2i1.27

Azizi, M. A., Hakim, R. N. & Nugraha, A. D. 2019. Optimalisasi Geometri Lereng Tambang Nikel Menggunakan Metode Probabilistik Pada Hill Pit 05 PT Vale Indonesia Tbk, Sorowako, Kabupaten Luwu Timur, Provinsi Sulawesi Selatan. Jurnal Geomine, 7(2), pp. 92-100. https://doi.org/10.33536/jg.v7i2.344

Bieniawski, Z. T. 1989. Engineering rock mass classifications. Ottawa, John Wiley & Sons.

Delgado-Reivan, X., Paredes-Miranda, C., Loaiza, S., Echeverria, M. D. P. V., Mulas, M. & Jordá-Bordehore, L. 2023. Stability Analysis of Rocky Slopes on the Cuenca–Girón–Pasaje Road, Combining Limit Equilibrium Methods, Kinematics, Empirical Methods, and Photogrammetry. Remote Sensing, 15(3), pp. 862. https://doi.org/10.3390/rs15030862

Gurocak, Z., Alemdag, S. & Zaman, M. M. 2008. Rock slope stability and excavatability assessment of rocks at the Kapikaya dam site, Turkey. Engineering Geology, 96(1-2), pp. 17-27. https://doi.org/10.1016/j.enggeo.2007.08.005

Hasria, Ahdiarno, L. O. M., Masri, Muliddin & Azzaman, M. A. 2023. Lingkungan Pengendapan Formasi Eemoiko Daerah Palangga Selatan, Kabupaten Konawe Selatan, Provinsi Sulawesi Tenggara. Jurnal Geologi dan Sumberdaya Mineral, 24(4), pp. 215-224. https://doi.org/10.33332/jgsm.geologi.v24i4.694

Idris, S. R., Muslim, D., Sulaksana, N. & Burhannudinnur, M. 2019. Karakteristik kestabilan lereng daerah Jatigede Kabupaten Sumedang, Provinsi Jawa Barat berdasarkan analisis kinematik. Jurnal Teknologi Mineral dan Batubara, 15(2), pp. 89-96. https://doi.org/10.30556/jtmb.vol15.no2.2019.1009

Kepmen ESDM 2018. No. 1827 K/30/MEM/2018 tentang pedoman pelaksanaan kaidah teknik pertambangan yang baik.

Masri & Sadisun, I. A. 2019. Analisis kestabilan lereng terhadap potensi longsoran guling menggunakan Continuous Slope Mass Rating (C-SMR) pada ruas jalan Tawaeli-Toboli km 42–52, Sulawesi Tengah. OPHIOLITE: Jurnal Geologi Terapan, 1(1), pp. 1-9. https://doi.org/10.56099/ophiolite.v1i1.8986

Muhammad, S., Masri, M. & Hasria, H. 2020. Analisis Kestabilan Lereng Menggunakan Metode Bishop di Pit ALC-14 Tambang Batubara PT. Equalindo Makmur Alam Sejahtera Kabupaten Kutai Kartanegara, Kalimantan Timur. Jurnal Geomine, 8(2), pp. 162-170. https://doi.org/10.33536/jg.v8i2.621

Pangaribuan, M. P. & Retongga, N. 2023. Analisis Kestabilan Lereng Menggunakan Metode Rock Mass Rating (RMR) dan Slope Mass Rating (SMR) untuk Menentukan Faktor Keamanan Lereng Pada Tambang Tuf Desa Candirejo, Kecamatan Semin, Kabupaten Gunungkidul, Daerah Istimewa Yogyakarta. Jurnal Geosains dan Teknologi, 5(3), pp. 171-190. https://doi.org/10.14710/jgt.5.3.2022.171-190

Priest, S. D. 1993. Discontinuity analysis for rock engineering. London, Chapman & Hall,.

Rai, M. A., Wattimena, R. K. & Kramadibrata, S. 2014. Mekanika Batuan (1 ed.). Bandung, ITB Press.

Yanuardian, A. R., Indrawan, I. G. B. & Warmada, I. W. 2018. Analisis kestabilan lereng di Desa Terbah dan sekitarnya, Kecamatan Patuk, Kabupaten Gunung Kidul berdasarkan Slope Stability Probability Classification. RISET Geologi dan Pertambangan, 28(1), pp. 101-101. https://doi.org/10.14203/risetgeotam2018.v28.745

Zakaria, Z. Z., Muslim, D. & Sophian, I. 2012. Koreksi SMR pada desain lereng tambang terbuka batubara pada Formasi Balikpapan dan Formasi Kampungbaru, Sanga-sanga, Kalimantan Timur. Buletin Sumber Daya Geologi, 7(3), pp. 147-157. https://doi.org/10.47599/bsdg.v7i3.115